Back to AnchorGuards

AnchorGuard for BR3 Bow Roller

(3 customer reviews)

$240.00

SKU: AMLS Category:

Description

Anchor Guard guarantees your anchor a snug fit on your bow.

Anchors frequently do not fit well on the bow rollers and boat owners resort to either switching to a sub optimal anchor design in order to ensure a better fit or invest heavily in expensive custom solutions to better secure their anchor on the bow. Anchor Guard was designed to mate an existing bow roller with an anchor of any design. Simple install uses the same bolt that articulates your roller, and converts an existing bow roller into a custom bow roller for any anchor. The design incorporates: Sturdy 316L Stainless Steel Precision Casting, Polyurethane V- guard from Stoltz Industries, and all 316L Fasteners.

This unit Mounts on the starboard side of the bow roller, the port mount in this size is not currently available

Additional information

Weight9 lbs
Dimensions6 × 6 × 6 in
Boat Size (length over water)

BOAT LESS THAN 35 FT, BOAT SIZE 35 – 45 FT

3 reviews for AnchorGuard for BR3 Bow Roller

  1. stu smith (verified owner)

    The Mantus “anchor mate” works perfectly on my Catalina 355. The anchor is secured and does not move when stowed. I am very happy with the item. I have 2 bow rollers, as many boats do, and removed the port roller to accommodate the anchor mate. This was the only adjustment I had to do.

  2. George Johnson (verified owner)

    I was dissapointed in this product because it caused my anchor to stick somewhat in the bow roller and I had to struggle to get it loose so my anchor would drop. I am thinking it wedged or got stuck do to the sun’s effect on the rubber part next to the anchor. However, I do have to say that my new 44# Mantus anchor held my Catalina 355 like a rock in Chas,SC during Hurricane Matthew……I anchored in a broad expanse of the Stono River and the hurricane passed directly by it. The boat didn’t drag at all!!!! I am amazed and definitely sold on these anchors!! The wind was so strong that it created a mist above the water at least five feet high and was quite scary looking…..

  3. John Bonhorst (verified owner)

    The Mantus Anchor Guard solved a problem that seemed to be unsolvable! Our boat is a Seacat 25 and as such it has a reverse rake bow. This results in any anchor, and I do mean any, to hit the hull in the stowed position. Two wrenches and one minute later, problem went away! Our boating is in the Sea of Cortez, and the combination of the Mantus anchor and Anchor Guard have made anchoring in wretched conditions a breeze.
    Gracias Mantus!

Add a review

Your email address will not be published. Required fields are marked *