When anchoring most people use a chain hook to connect the snubber to the chain and when mooring we recommend using our mooring snap shackle to attach the bridal to the mooring ball. If using the Mantus bridal for both … Continued
The user manual and videos on our youtube channel for the Mantus Scuba Compressor list the requirements for running the compressor. Apart from the operating requirements, the tips for continued use include: – Cleaning the strainer above the water pump … Continued
The Mantus Scuba Compressor is designed to fill small scuba diving cylinders with breathable atmospheric air in a short amount of time. You can view the manual here. It is designed to run continuously even in moderately hot weather. It … Continued
Our Mantus Scuba Compressor is fast to set up, as we have tested the units before they are sent out. As detailed in the manual here, you only need to unpack the compressor, add standard 30W compressor oil (full synthetic … Continued
The Mantus Scuba Compressor uses a 1.3 kW electric motor, but with the peak current on start of the machine the wattage can be 3 times higher to around 3600 W. Most inverters have a 50% overload capacity, meaning a … Continued
Stainless steel degrades over time in a salt water environment and we recommend replacing the swivel every 5 years.
The S2 swivel is ideally used for 5/16″ – 3/8″ for Grade 30 or Grade 40 (G4) chain, the swivel will match or exceed the chains ultimate breaking strength. S3 swivel can also fit 3/8 chain to match the loads … Continued
The S1 swivel is ideally used for 1/4″ – 5/16″ for Grade 30 or Grade 40 (G4) chain, the swivel will match or exceed the chains ultimate breaking strength. S2 swivel can also fit 5/16 chain to match the loads … Continued
Yes, the Mantus Scuba Compressor can fill a sealed tank of any size to 3000 psi given enough time. Most portable high pressure compressors on the market provide fill rates of 60 – 80 liters per minute and can fill … Continued
The fit of an anchor on a boat will be affected not just by the geometry of the bow, but also the position and angle of the bow roller the anchor sits upon. We strongly recommend using a template to … Continued
