If the Mantus Compressor is having trouble starting or running, first check page 19 of the manual here for running requirements. The most common causes for trouble starting include: – Low power systems. The smallest electrical systems that can start the compressor are 3000W inverter power or a 2000W, 30amp generator. For these systems, try…
When you dive with a big tank, at the end of the dive you have a big empty tank that is buoyant (for example an empty aluminum 80 cubic foot tank has over 4.1 lbs. of buoyancy). To compensate for this a diver has to add 4 extra pounds on top of the weight necessary…
Given that diving with our compact 26 cubic foot tank you have about 30 minutes of air, we do not recommend going deeper than 40 feet and spending most of your time at depths equal to or less than 30 feet. Diving deeper will reduce the effective time remaining in your tank, and a decompressing…
Yes you can purchase an adapter and connect your smaller tank to a bigger tank. This is called a scuba tank equalizer. Here is one example:
It is true that stainless steel corrodes in a more dishonest way than galvanized steel, further galvanic corrosion of stainless with galvanized steel ground tackle promotes degradation of the  zinc coating on galvanized steel. At the same time galvanized swivels don’t swivel and corrode after they lose their galvanization. If you decide that you want a swivel that works you…
When anchoring most people use a chain hook to connect the snubber to the chain and when mooring we recommend using our mooring snap shackle to attach the bridle to the mooring ball. If using the Mantus bridle for both snubbing when anchoring and as a mooring bridle, one would need to disconnect the chain…
The user manual and videos on our youtube channel for the Mantus Scuba Compressor list the requirements for running the compressor. Apart from the operating requirements, the tips for continued use include: –Â Cleaning the strainer above the water pump when it becomes clogged. The brass fitting holding the strainer is removable by hand. If…
The Mantus Scuba Compressor is designed to fill small scuba diving cylinders with breathable atmospheric air in a short amount of time. You can view the manual here.Our compressor is designed to run continuously even in moderately hot weather, and water can be exchanged or ice-cooled to dump heat.It runs on 110V at 60Hz, with…
Our Mantus Scuba Compressor is fast to set up, as we have tested the units before they are sent out. As detailed in the manual here, you only need to: The subsequent maintenence is also detailed in the manual. Storage is also simple as you just perform the setup steps in reverse, and you can…
The Mantus Scuba Compressor uses a 1.3 kW electric motor, but with the peak current on start of the machine the wattage can be 3 times higher to around 3600 W. Most inverters have a 50% overload capacity, meaning a 2000 W inverter will have only 3000 W overload capacity. To be safe, a 3000W…
No products in the cart.
Please log in to access the affiliate area.
