Swivels

It is true that stainless steel corrodes in a more dishonest way than galvanized steel, further galvanic corrosion of stainless with galvanized steel ground tackle promotes degradation of the  zinc coating on galvanized steel. At the same time galvanized swivels don’t swivel and corrode after they lose their galvanization. If you decide that you want a swivel that works you…

Stainless steel degrades over time  in a salt water environment, and we recommend replacing the swivel every 5 years.

The S2 swivel is ideally used for 5/16″ – 3/8″ for Grade 30 or Grade 40 (G4) chain, the swivel will match or exceed the chains ultimate breaking strength. S3 swivel can also fit 3/8 chain to match the loads required for G70 chain. Since Grade 70 chain is uncommon most of the time S2…

The S1 swivel is ideally used for 1/4″ – 5/16″ for Grade 30 or Grade 40 (G4) chain, the swivel will match or exceed the chains ultimate breaking strength. S2 swivel can also fit 5/16 chain to match the loads required for G70 chain. Since Grade 70 chain is uncommon most of the time S1…