Questions related to the Mantus Dinghy
Same dock footprint, far more room: the Mantus Dinghy’s interior measures 8’8” long by 4’3” wide — 64 cubic feet of internal volume versus roughly 33 in a comparable RIB, because there are no inflatable tubes taking up the interior. There is nothing to patch or re-glue, and molded-in foam bumpers replace air collars. The…
Lead time for new orders is 3–4 weeks. The Mantus Dinghy is made in Texas, USA. You can purchase direct or find a dealer here.
The Mantus Dinghy arrives ready to launch: seats, oars, storage bags, and a plumbed 6-gallon fuel tank are included. Add-on options include transom wheels, a swim ladder, a bimini, a cover, and a center console for remote steering.
Yes. The rotomolded HDPE hull floats fully loaded even when every chamber is flooded, verified in Coast Guard flotation and capacity testing. See our dinghy safety page for details.
The Mantus Dinghy (Model 104) is 10.4 feet long overall with a beam of 5.7 feet and a height of 28 inches. The hull weighs 220 lbs dry, carries a tested weight capacity of 755 lbs and four passengers, and takes up to a 20 HP outboard. Interior space is 64 cubic feet — nearly…
Applying antifouling paint to an HDPE (High-Density Polyethylene) boat requires a specialized primer system, as conventional marine paints do not adhere properly to the inherently low-friction surface of HDPE. The key is to use a specific bonding primer designed for poly plastics, followed by a compatible antifouling paint. Recommended Primer: You will need a specialized primer…
No products in the cart.
Please log in to access the affiliate area.
