Snubber Pendant

$82.00$120.00

 

Mantus Snubber Pendant is designed to attach the snubber line to chain/or line rode. It is made from UHMWPE fiber (Ultra high molecular weight polyethylene fiber) material known to be size for size as strong as steel.

Use as Snubber attachement:

While many sailors use chainhooks to attach snubber to chain others prefer to tie a rolling hitch directly onto the chain rode. The advantage of Mantus Snubber Pendant is that it is easier to tie and much easier to remove after any significant loading, further the 5mm Pendant can be used on line rode as well by simply tying a 3 pass prusik knot, thus smaller boats that have mostly line anchor rode can still attach the bridle using the Snubber Pendant.

The same 5 mm pendant is really useful when it is necessary to offload a  line under load. A simple 3 pass prusik knot should be used for attachment and removal is real easy even after > 1000 lbs loading.

All pendants include an appropriately size 316 stainless steel shackle see table below for details

Clear selection
SKU: N/A Category:

Description

Snubber Pendant Sizing

Pendant Size (Line Diameter)Shackle SizeRecommended for following
Chain Size
Pendant Strength UTS as used with two legs
5 mm7/16 inch5/16 inch ( 6-8 mm)12,000 lb
8 mm1/2 inch3/8 inch (10 mm)23,000 lb
10 mm5/8 inch1/2 inch (12 mm)32,300 lb

Additional information

Weight0.4 lbs
Dimensions9 × 5 × 2 in
Snubber Pendant Size

5mm, 8mm, 10mm, 12mm

Q & A

Question
How long overall is the 5mm snubber pendant? I am considering that pendant for my 5/16" anchor chain and 1/2" rope rode. ( I have 150' of chain followed by 75' rope rode). I am assuming the the 5mm pendant is correct for that size chain and rode. Christopher asked on November 12, 2021
Answer
Christopher, that is correct, for sizing that you have, you need 5 mm snubber pendant. Nina Zhukova answered on November 12, 2021 store managerstore manager
Upvote (0) Downvote (0)
Loading
Question
I just purchased the 8mm pendant for use on an 18mm rope rode. I just read the answer below that the 8mm pendant may slip on rope. Did I purchase the wrong product? Mike asked on November 8, 2021
Answer
Mike, for best results attaching to the 18mm line we would recommend 5mm pendant. You can return 8mm pendant and purchase 5mm.If you have any questions, please contact us via phone 855-626-6887 or email: [email protected] Nina Zhukova answered on November 8, 2021 store managerstore manager
Upvote (0) Downvote (0)
Loading
Question
Will 5mm work with 1/4 inch HT Chain? Pam asked on October 25, 2021
Answer
Yes, 5mm Snubber pendant will work on the 1/4 inch chain Greg Kutsen answered on October 30, 2021 store managerstore manager
Upvote (0) Downvote (0)
Loading
Question
What size should I use on 5/8 plait. Have a Mainship 34, 20,000 Ron asked on September 2, 2021
Answer
We recommend the 5mm Pendant Phil Kutsen answered on September 3, 2021 store managerstore manager
Upvote (0) Downvote (0)
Loading
Question
I have just received the 8mm snubber. Why is it not as flexible as shown in your video? Am concern if it will slip on my 10mm chain. Andrew Chan asked on June 23, 2021
Answer
Andrew the Pendant is covered in a chafe guard, it will loosen up slightly after use.Once loaded the prusik knot will wrap around the chain , and should not slip. Phil Kutsen answered on June 28, 2021 store managerstore manager
Upvote (0) Downvote (0)
Loading

Ask a question

Your question will be answered by a store representative or other customers.

Thank you for the question!

Mail

Your question has been received and will be answered soon. Please do not submit the same question again.

Error

Warning

An error occurred when saving your question. Please report it to the website administrator. Additional information:

Add an answer

Thank you for the answer!

Mail

Your answer has been received and will be published soon. Please do not submit the same answer again.

Error

Warning

An error occurred when saving your question. Please report it to the website administrator. Additional information: