The Mantus M1 Anchor
From $176

Engineered in the USA
DIGS LIKE NO OTHER
The Mantus Anchor is designed to penetrate dense, grassy bottoms and set with unparalleled holding power. When tested, our anchors set faster and deeper than any other tested anchor, including Rocna, Manson Supreme, Bulwagga, Fortress, Bruce, CQR and Danforth anchors.
The Mantus Marine anchor lineup simply has the best boat anchors available, whether you are a long-range cruiser, racing, or going out for a day sail. The Mantus quick-set anchor is stowable and breaks down for easy storage, so you can store one or two as spares without needing to take up much boat space.
Built Strong

LIFETIME WARRANTY
BUILT TO LAST
Mantus anchors are warrantied for the LIFETIME of the original purchaser. If an anchor becomes damaged we will ship a replacement part – shank, fluke or roll-bar. The galvanized coating on anchors is covered for 3 years from date of purchase.
WHICH ANCHOR SHOULD YOU CHOOSE?
After the release of the Mantus M2 Model, we often get the question: which one is better? Both Anchors have an amazing setting and resetting ability and both are excellent choices for a primary anchor, but each has its own small specific advantages. Both anchors roll over well in most bottom conditions and it is rare for a properly weighted anchor to end up upside down. Nevertheless, M1 Anchor, due to its roll bar, is better at rolling over in a really soft, silty bottom. The M2 Anchor is less likely to get plugged up with muddy weeds, and without the need for the roll bar, M2 is less bulky. Thus, the M2 model provides a better fit for boats with bow pulpits with slotted anchor housing and bow sprits.

M1
Design
Setting Performance
Construction
Storage
Best For
VS

M2
Design
Setting Performance
Construction
Storage
Best For
DIMENSIONS AND FIT

M1 MODEL DIMENSIONS (IMPERIAL) | ||||||||||
A | B | C | D | E | F | G | H | I | J | |
2.5 lbs | 17 | 10.2 | 11.8 | 4.0 | 3.2 | 0.8 | 0.3 | 9.3 | 6.1 | 4.1 |
8 lbs | 22 | 13.0 | 15.1 | 5.1 | 4.1 | 1.0 | 0.4 | 11.9 | 7.9 | 5.3 |
13 lbs | 26 | 15.9 | 18.4 | 6.2 | 5.0 | 1.2 | 0.4 | 14.5 | 9.6 | 6.5 |
17 lbs | 29 | 17.5 | 20.4 | 6.9 | 5.5 | 1.3 | 0.5 | 16.0 | 10.6 | 7.1 |
25 lbs | 31 | 19.0 | 22.0 | 7.4 | 5.9 | 1.5 | 0.5 | 17.3 | 11.4 | 7.7 |
35 lbs | 35 | 21.1 | 24.5 | 8.3 | 6.6 | 1.6 | 0.6 | 19.3 | 12.7 | 8.6 |
45 lbs | 39 | 23.7 | 27.5 | 9.3 | 7.4 | 1.8 | 0.7 | 21.6 | 14.3 | 9.6 |
55 lbs | 42 | 25.4 | 29.4 | 10.0 | 7.9 | 1.9 | 0.7 | 23.2 | 15.3 | 10.3 |
65 lbs | 45 | 27.0 | 31.4 | 10.6 | 8.4 | 2.1 | 0.7 | 24.7 | 16.3 | 11.0 |
85 lbs | 47 | 28.7 | 33.3 | 11.3 | 9.0 | 2.2 | 0.8 | 26.2 | 17.3 | 11.7 |
105 lbs | 51 | 31.1 | 36.0 | 12.2 | 9.7 | 2.4 | 0.9 | 28.3 | 18.7 | 12.6 |
125 lbs | 55 | 33.4 | 38.8 | 13.1 | 10.4 | 2.6 | 0.9 | 30.5 | 20.1 | 13.6 |
155 lbs | 63 | 37.9 | 44.0 | 14.9 | 11.8 | 2.9 | 1.0 | 34.6 | 22.9 | 15.4 |
175 lbs | 67 | 40.5 | 47.0 | 12.7 | 3.1 | 1.1 | 37.0 | 24.4 | 16.5 |
M1 MODEL DIMENSIONS (METRIC) | ||||||||||
A | B | C | D | E | F | G | H | I | J | |
1.1 kg | 427 | 259 | 300 | 102 | 81 | 20 | 7 | 236 | 156 | 105 |
3.6 kg | 546 | 331 | 384 | 130 | 103 | 25 | 9 | 302 | 200 | 135 |
5.9 kg | 666 | 403 | 468 | 158 | 126 | 31 | 11 | 368 | 243 | 164 |
7.7 kg | 735 | 446 | 517 | 175 | 139 | 34 | 12 | 407 | 269 | 181 |
11.4 kg | 795 | 482 | 559 | 189 | 150 | 37 | 13 | 440 | 290 | 196 |
15.9 kg | 884 | 536 | 622 | 210 | 167 | 41 | 15 | 489 | 323 | 218 |
20.5 kg | 993 | 602 | 699 | 236 | 188 | 46 | 17 | 550 | 363 | 245 |
25.0 kg | 1063 | 644 | 747 | 253 | 201 | 49 | 18 | 588 | 388 | 262 |
29.5 kg | 1132 | 687 | 796 | 269 | 214 | 53 | 19 | 627 | 414 | 279 |
38.6 kg | 1202 | 729 | 845 | 286 | 227 | 56 | 20 | 665 | 439 | 296 |
47.7 kg | 1301 | 789 | 915 | 309 | 246 | 61 | 22 | 720 | 475 | 321 |
56.8 kg | 1401 | 849 | 985 | 333 | 265 | 65 | 23 | 775 | 512 | 345 |
70.5 kg | 1589 | 964 | 1118 | 378 | 301 | 74 | 26 | 879 | 581 | 392 |
79.5 kg | 1699 | 1030 | 1194 | 404 | 321 | 79 | 28 | 940 | 621 | 419 |
ANCHOR SIZING GUIDE
Use the following guide to determine what size of anchor to use:
When making sizing recommendations for a working anchor we are generally referring to the needs of a cruising boat spending most of its time on anchor, in doing so we try to envelope high sustained winds (40 kts) and assume poor holding conditions (low viscosity bottoms). Some may think these recommendations to be too conservative especially when compared to sizing tables from other manufacturers. Companies often make claims of superior anchor efficiency, stating that their small anchor X will outperform a much heavier anchor from their competitors and often use sizing charts as a marketing tool to that end, recommending anchors and anchor systems that are dangerously undersized for their intended use. Comparing surface area can be a good judge for potential holding capability. Our anchor sizing recommendations are presented in the table below and we divided in three categories: Lunch Anchor category is recommended for lighter use, expected winds under 25 knots, working anchor for winds under 40 knots and finally, storm anchor recommendations are intended for winds up to 60 knots. These recommendations are made assuming the worst-case scenario, a poor holding bottom and thus may seem conservative but we believe are accurate.
OUR WARRANTY
The Full Warranty can be read here.
The short version: Mantus anchors are warrantied for the LIFETIME of the original purchaser. If an anchor becomes damaged we will ship a replacement part – shank, fluke or roll-bar. The galvanized coating on anchors is covered for 3 years from date of purchase.
CONSTRUCTION GUIDE
Bolts, Washers and Nuts are provided with every Mantus Anchor. In the event of replacing a lost fastener, please make sure to always use proper size. Always use locking washers, or nylon lock nuts, and tighten the nut securely. Click here to download a printable pdf of the assembly instructions.
Anchor Size | Bolt sizes | Number of Bolts |
Mantus 8 lbs | 1/4 | 6 bolts, nuts, lock washers |
Mantus 13 lbs | 3/8 | 6 bolts, nuts, lock washers |
Mantus 25 lbs | 3/8 | 6 bolts, nuts, lock washers |
Mantus 35 lbs | 1/2 | 6 bolts, nuts, lock washers |
Mantus 45 lbs | 1/2 | 6 bolts, nuts, lock washers |
Mantus 55 lbs | 5/8 | 6 bolts, nuts, lock washers |
Mantus 65 lbs | 5/8 | 6 bolts, nuts, lock washers |
Mantus 85 lbs | 5/8 | 6 bolts, nuts, lock washers |
Mantus 105 lbs | 3/4 | 6 bolts, nuts, lock washers |
Mantus 125 lbs | 3/4 | 6 bolts, nuts, lock washers |
Mantus 155 lbs | 3/4 | 6 bolts, nuts, lock washers |
Mantus 175 lbs | 3/4 | 6 bolts, nuts, lock washers |
RETURN POLICY
Mantus Marine stands behind its products and wants you to be completely satisfied. If you find that a product does not meet your expectations, or does not work for your application, please contact us as soon as possible so we can work out a solution for you. Please keep all anchor boxes and original packaging until you are sure you want to keep the product. Shipping fees will be deducted from returns. We apologize, but used products cannot be returned.
Customers that purchased via another sales channel, should contact the relevant store to initiate the return process.
CALL US WITH ANY QUESTIONS
WITHIN THE US: 1-855-262-6887
BEYOND THE US: 469-226-3468 / 469-878-4083
CALL US WITH ANY QUESTIONS:
WITHIN THE US: 1-855-262-6887
BEYOND THE US: 469-226-3468 / 469-878-4083