Mantus Snubber Pendant

Mantus Snubber Pendant
Mantus Snubber Pendant Chain to Bridle
Mantus Snubber Pendant

Mantus Snubber Pendant

The Mantus Snubber Pendant is designed to attach the snubber line to chain/or line rode. It is made from UHMWPE fiber (Ultra high molecular weight polyethylene fiber) material known to be size for size as strong as steel.

Use as Snubber attachement:

While many sailors use chainhooks to attach snubber to chain, others prefer to tie a rolling hitch directly onto the chain rode. The advantage of the Mantus Snubber Pendant is that it is easier to tie and much easier to remove after any significant loading. Further, the 5mm Pendant can be used on line rode as well by simply tying a 3-pass prusik knot. Thus, smaller boats that have mostly line anchor rode can still attach the bridle using the Snubber Pendant.

The same 5 mm pendant line is really useful when it is necessary to offload a line under load. A simple 3-pass prusik knot should be used for attachment and removal and is really easy even after > 1000 lbs loading.

All pendants include an appropriately sized 316 stainless steel shackle; see the table below for details.

Mantus Marine Snubber Pendant

Mantus Marine Snubber Pendant

Snubber Pendant Sizing

Pendant Size (Line Diameter)Shackle SizeRecommended for following
Chain Size
Pendant Strength UTS as used with two legs
5 mm7/16 inch5/16 inch ( 6-8 mm)12,000 ft. lb
8 mm1/2 inch3/8 inch (10 mm)23,000 ft. lb
10 mm5/8 inch1/2 inch (12 mm)32,300 ft. lb

WITHIN THE US: 1-855-262-6887
BEYOND THE US: 469-226-3468 / 469-878-4083

More Mantus Products

[go_portfolio id=”product-slider”]